PM&C’S TOTAL SUPERVISION®
1.
Automatically
calculates the electric bill and compares it with
the received one. This app allows you to prove, if the received bill from the
electricity company corresponds to
what was really consumed by your company.
2. Control of the electric demand and consume
to avoid fines: It constantly calculates the
consumed energy, alerting when the maximal limit of consume is about to be
exceeded, which would cause a fine. Besides the warning, it will allow the user
to take automatic actions like the disconnection of a non-vital charge, or the
ignition of the Power Generator to avoid the fine.
3. The Power Factor: Maintaining a low Power Factor, doesn’t only increase the electric
bill, it also, according to the established by the resolution Nr. 75 of the
“Ministerio Del Poder Popular” for electricity, it is a motive of suspension of
the electric service for consumers with a demand bigger than 200kVA.
Total Supervision® has the
option of dynamic control of the Power Factor, maintaining it according to the
established by the resolution Nr.75.
4.
Supervision
of the power station: it sends a SMS or an E-mail
when the fuel is in critic state or when one of the panel indicators is
activated, pointing out that the Power Generator will not turn on. This option
allows you to secure the availability of you electric support, avoiding
interruptions in the operations of the company, or loss of perishable products.
5.
Illumination
control: it offers the option to turn dynamically
on/off lights. This way, you will be able to combine the external lights with
the artificial illumination, to reach the optimum level, avoiding unnecessary
lights.
6.
Vigilance
of the air conditioning system: Usually, the power
(on/off) control is done through clocks that occasionally don’t work well, or
that are wrongly programmed. As a consequence, the system carries out additional
power turn on’s in non-labor hours. For example at 2 PM and also at 2 AM. This
non-desired activations cause unnecessary consumes, which increase the cost of
the electric bill. Total Supervision® completely eliminates these
events, preventing the waste of energy.
It includes additional functions like the smart-turn on of the units and
the control by CO2.
7.
Operability
and time of useful use of the electric devices: It
watches in real time the behavior of the electronic net, alerting whenever the
equipment finds itself working out of the regimen suggested by its
manufacturer. This information allows you to take corrective actions before an
incident happens.
This option is effective to decrease the risk of damage in the
refrigeration and air conditioning system, given the fact that it is possible
to take corrective actions before damage occurs.
8.
Cold
Chain supervision: The good condition of the perishable
products or of those that need refrigeration, impacts not only the company’s
actives, but also its Quality-Image.
Total Supervision® offers the
option to inform by E-mail or SMS, whenever a fridge has exceeded the maximum
allowed temperature.
It offers a daily report on the opening time of every fridge, allowing
you to verify if it corresponds to the operative requires of the company
The information on the condition of the elements of the refrigeration
system is sent directly to the staff that is in charge of maintenance, allowing
them to take corrective actions before any problem turns into a loss for the
company
9.
Consume-Profile
of drinking water: the latest increments in the
cost of drinking water increase the motivation to carry out a continuingly
measurement of consume. This way, you can build a profile schedule that will
allow you to determinate the existence of a leak or subtractions of the liquid
and calculate the water bill to compare it with the received one.
10. Total Supervision® is a Power Management & Consulting © product
and it’s offered under the type of contract of service with monthly fees.